So let’s look at what that means in one of those locations. The one Verizon picked in its diagram: Los Angeles. All of the Verizon FiOS customers in Southern California likely get some of their content through this interconnection location. It is in a single building. And boils down to a router Level 3 owns, a router Verizon owns and four 10Gbps Ethernet ports on each router. A small cable runs between each of those ports to connect them together. This diagram is far simpler than the Verizon diagram and shows exactly where the congestion exists.
Verizon has confirmed that everything between that router in their network and their subscribers is uncongested – in fact has plenty of capacity sitting there waiting to be used. Above, I confirmed exactly the same thing for the Level 3 network. So in fact, we could fix this congestion in about five minutes simply by connecting up more 10Gbps ports on those routers. Simple. Something we’ve been asking Verizon to do for many, many months, and something other providers regularly do in similar circumstances. But Verizon has refused. So Verizon, not Level 3 or Netflix, causes the congestion. Why is that? Maybe they can’t afford a new port card because they’ve run out – even though these cards are very cheap, just a few thousand dollars for each 10 Gbps card which could support 5,000 streams or more. If that’s the case, we’ll buy one for them. Maybe they can’t afford the small piece of cable between our two ports. If that’s the case, we’ll provide it. Heck, we’ll even install it.
But, here’s the other interesting thing also shown in the Verizon diagram. This congestion only takes place between Verizon and network providers chosen by Netflix. The providers that Netflix does not use do not experience the same problem.
Why is that?